DLS RM40
Artikel-Nr.: DLS RM40Auf Lager
REFERENCE series RM40 is a 4-channel amplifier. Provides a power output of 4 x 75 Watts in 2 ohm stereo load, and 2 x 175 Watts in 4 ohm mono bridge-connection.
- Built-in variable 50-500 Hz switchable low pass filter for subwoofers.
- Built-in/switchable variable 50-500 Hz high pass filter
- High level input with automatic start.
- RMS output power at 14,4 volt DC feed.
- Built-in variable 50-500 Hz switchable low pass filter for subwoofers.
- Built-in/switchable variable 50-500 Hz high pass filter
- High level input with automatic start.
- RMS output power at 14,4 volt DC feed.
 |
| Number of channels | 4 |
| Amplifier class | AB |
| Output power in 2 ohm | 4 x 100 W RMS |
| Output power in 4 ohm | 4 x 75 W RMS |
| Mono bridge mode 4 ohm | 2 x 175 W RMS |
| Damping factor | > 100 |
| S/N ratio, A-weighted | > 100 dB |
| Frequency range | 10 Hz - 35 kHz |
| Input sensitivity | 0,25 - 8 V |
| Input impedance | > 47 kohm |
| Input impedance, high level | 220 ohm |
| Filters channel A & B | HP: 50 - 500 Hz, LP: 50 - 500 Hz |
| Filters channel C & D | HP: 50 - 150 Hz, LP: 50 - 500 Hz |
| Low level output | No |
| Remote bass level control | No |
| Remote phase shift control | No |
| High level input with auto start | Yes |
| Integrated fan | Yes |
| Power consumption (idle) | 0,75 A |
| Power consumption (max) | 50 A |
| Rec. power cable | Minimum 4AWG / 21 mm2 |
| Fuses | 2 x 25 A |
| Dimension (W x D x H) | 189 x 312 x 55 mm (7,44 x 12,3 x 2,16 ") |
| Weight | 2,9 kg ( 6,4 lb) |
| EAN Bar code | 7331644029700 |